Ambassador
Bikes
Colour | Royal BlueBritish GreenBurghundy Wine |
Motor | Smart Hub: 50Nm - 250W |
Battery | Standard Battery: 48V - 10.5Ah |
Standard frame
Designed for people over 5 feet 6 inches (170cm)
With 26 inch wheel
The Motor
Rayvolt hubs are a very complex brushless 3 phase dc motor comprising of 48 different copper coils and magnets that are placed on the outermost perimeter of the motor for the best possible torque.
The built-in controller receives heat and position data from the coils and within one millisecond computes where to put the next load.
Such accuracy produces a Pure Sine Wave (PSW) current, offering unmatched ride comfort:
- More Acceleration
- More Response
- More Torque
- Less Noise
- Less Vibration
- Less Consumption
Batteries
At the core of any electric vehicle, its performance and life expectancy are directly linked to the type of cell used. The capacity of the battery pack also depends on the amount of cells used.
Rayvolt uses 13 cells in a series to reach a nominal voltage of 48V. At peak voltage, a full charge of 54.6V gives incredible power. We use a minimum of 4 cells in parallel (52 cells in total) or 8 cells in parallel (104 Cells in total).
This gives an unmatched capacity of 550Wh and 1100Wh – most of the industry uses 300 to 360Wh.Battery quality is linked to the cells used and also the way it is packed. Using a state-of-the-art battery management system in our packs, each cell is connected to it before delivering the charge. This high-tech design balances the charge between each individual cell and can cut the connection in case of a short circuit. This ensures best possible performance while making the battery safer.
Intelligent Pedal Assist
With multiple choices power assistance with gyroscope hill detection Motor aid self adjusts.
Dual Sensor Crank Set
The Electronic Crank comes fitted with a Load Cell, which measures both the Torque applied to the pedal and the crank rotary speed. A Controller then computes these two values, and with a smart algorithm, provides perfectly smooth power based on muscle activity.
The Eiva® is Rayvolt's developed software to control, customize and monitor your Rayvolt bike.
The EIVA app can be easily downloaded and comes free with your Rayvolt eBike and can be used on your IOS or android devise for easy and mobile access. This allows you to connect to your Rayvolt eBike via the built in Bluetooth device and gives you the ability to change the settings to meet your cycling requirements.
- Display 360º Monitor speed, battery state, MPH/KM Run & essential bike specs
- Bluetooth bike status Monitor the connection between the bike and Eiva®
- iPas Monitoring Adjust your pedal assistance here
- Settings Advanced configurations available
- Free App Available when you purchase your Rayvolt eBike and operates on IOS or Android.
- Mobile Device Control Use your mobile device anywhere and anytime to manage and change your Rayvolt settings on the go to meet your cycling requirements.